Caution: Be sure your vacuum is unplugged from the electrical outlet before proceeding! There are 3 screws on each side of the top cover of the Rainbow ‘E’ series vacuum cleaners located behind the decals. To get to the screws; use a non-scratching tool such as a plastic putty knife and pry out a corner of the plastic window, carefully pull out the plastic window and decal and remove the 3 screws. Repeat this process for both windows and then just lift up the top cover to expose the inside.
Please leave a comment and let us know if this post was helpful or not. Got a repair problem you need help with? Need an opinion on which vacuum you should buy? Would you like to share a review of a cleaning product or machine? Why not post a message of your own. Just click the “Register” link under the META tab to get started.






I need to replace the filters, but it sounds like the berrings are going bad on my Rainbow E series. Can these be replaced by us ? Please let us know . thank You! Carol Armstrong
I need to replace bottom pump seal, flange plate and rubber seal (gasket) on my model D4C Rainbow. I also need to know where to obtain these parts. Can you give me instructions.
I am looking for a vacuum sucksion motor and a switch in the handle for the power head. model on motor is r11409 model on vac is e2 type 12 r11957d-0
Ineed motor fan e-2 series.
the SE rainbow has to open through the bottom
I would like to do a complete rebuild for our rainbow sweeper, can you please e-mail me with the details. bjp650@comcast.net
are e- rainbow don’t have the 3 screws on the sides .i need to replace the power cord plz help.can be e-mail to smeadows45@yahoo.com
thank you
How do I remove the old housing from a series SE to replace a new one?
I am wanting a phone number and a address to order parts for my vacuum. I would appicate any help that you can give. Thank-you.
how to replace a switch on rainbow e2 serie
How do I change the filters on my Rainbow E Series?