About US

-Repair and maintain your own vacuum cleaner, carpet cleaner, Stick vac, canister or upright vacuum. -Find Vacuum Repair centers in your area -Share your expertise on vacuum repair -Seek solutions to fixing your own vacuum -Made a recent purchase of a very good (or very bad) vacuum? Save someone else the frustration of of vacuums that fall apart or just don't work - write a review of your purchase.

Miele Canister Vacuum Model S4212 Polaris

Miele vacuum S4212 Polaris with SBD 450 - 3 Combination Carpet/Smooth floor tool (Recommended for: short-pile carpeting, area rugs and smooth flooring) Learn More

Miele Canister Vacuum Model S4212 Neptune

S4212 Neptune with STB 205-3 Turbo Comfort Brush
(Recommended for:  low to medium-pile carpeting, area rugs and smooth flooring)
Learn More

Miele Canister Vacuum Model S5281 Callisto

S5281 Callisto with SEB217-3 Powerbrush (Recommended for: medium-to high pile carpeting, area rugs and smooth flooring) Learn More

From our tech support line: How do I change the belt on a Bissell model 6579 Powerforce bagless upright?

Refer to the drawing below.

BE SURE TO UNPLUG YOUR VACUUM CLEANER FROM THE WALL OUTLET BEFORE PROCEEDING!

  1. Lower the handle and turn the vacuum bottom side up
  2. Remove the 4 phillips head screws as shown below and lift the bottom plate off.
  3. Remove the brush roll. Remove the old belt from the motor shaft.
  4. Remove any hair and debris from the brush roll, especially under the end caps.
  5. Put the new belt around the motor pulley and brush roll.
  6. Streeeeeeeech the belt side of the brush roll toward you and secure it in place. Secure the other end of the brush roll.
  7. Rotate the brush manually a few times to make sure the belt is not pinched.
  8. Reinstall bottom plate.

bissell6579
6579belt
Buy a set of 3 of these Style 7 belts – just $8.99 Free Shipping!

Leave a Reply

 

 

 

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>