Vacuum Cleaner Repair and Installation Tips – Free!

From Hal VF

How do I replace a bissell baffle and bladder assembly. On my model #1698-1 bissell carpet shampooer?

Refer to the drawing below.

BE SURE TO UNPLUG YOUR VACUUM CLEANER FROM THE WALL OUTLET BEFORE PROCEEDING!

Lower the handle and turn the vacuum bottom side up
Remove the 4 phillips head screws as shown below and lift the bottom plate off.
Remove the brush roll. Remove the old belt from the motor shaft.
Remove any hair and debris [...]

Our Little Green runs, but won’t spray.  Can it be fixed?

Susie

This is a schematic for Bissell Proheat Upright Deep Cleaners models 1697, 1698, 1689-1, 1699, 1699-1, 1699-5, 1699-8, 1699-A, 1699-F and 1699-P
Offered for the convenience of our visitors. Most parts for these models are available at  The Vacuum Cleaner Shop

Click the image for a larger view.

Donation Amount: (Currency: USD)

Any amount is greatly [...]

Need Style 12 filters & belts and bearing(s) for this vacuum.  Can’t find it on the list of models.  Can we still get parts , etc. for this or did it go the way of extinction like so many things do?

I have a four year old Bissell shampooer model 9300m……..c.  When I squeeze the trigger it releases water for about 5 seconds and stops in either floor or attachment mode.  I think it is the pump.  What say you?

Chuck

Looking for page 18 of the repair manual, mine is missing.  I need a plumbing schematic.

does anyone have pagge 18 of the bissell repair manual?  I need a plumbing schematic.  Replaced the pump and now the sprayer does not work in floor mode but works in the tool mode.

Sorry but Bissell no longer supports these models and all parts are no longer available

Donation Amount: (Currency: USD)

Any amount is greatly appreciated and will help us to maintain this site for you.

Most Bissell Proheat Carpet Cleaners have a small pump located in the front of the machine underneath the nozzle and a rectangular heater located inside the handle assembly. The most common cause we have found of them not spraying solution is due to the heater being plugged, followed by a broken or stretched pump belt [...]